Water/Waves Tutorial

Okey Dokey, here is my first attempt at a tutorial…feedback encouraged! Hopefully at least some of this makes sense. πŸ™‚

I’m going to explain the ridiculous way I figured out how to do the gradient water/waves quilt. It is entirely possible there is a better way to do this, but this way worked for me, so hopefully it works for you!

First let’s take a look at the pattern repeat. The quilt is made up of two rows that repeat as many times as you’d like them to. You can use a variety of colors, but for this version I chose a six color version, seen below.

Must Love Quilts Water/Waves Tutorial

Here is a better look at how the blocks are pieced together to make up the rows:

Must Love Quilts Water/Waves Tutorial

As you can see above, there are 2 rows of 6 blocks each. All of those blocks will be made via strip piecing. Each strip set will produce 4 blocks, which is enough for a lap size throw in the end if you do 6 blocks across. To make the quilt shown in this tutorial you end up needing 12 strip sets to produce the 12 blocks above.

Now it is time to figure out the pesky colors and how many strips of each color you need. First, number your chosen colors (I literally pinned a piece of paper with a written number to each color fabric). Next, using the pattern repeat diagram and the colors chosen, number the colors and where they occur in your diagram, like below.

Must Love Quilts Water/Waves Tutorial

Now go through and count the number of times each color appears in the strips (ie; how many times the number 1 appears in the diagram, etc), and presto, the number of strips you need of each color! Write this down by your chosen colors and get to work cutting out your strips. Again, I kept the color number pinned to each stack of strips so I wouldn’t get confused, especially if you are using similar colors!

4

I cut my strips 2.25 inches so that I could end up getting 4 blocks per strip set. You can use 2.5 inches, but you only end up getting 3 blocks per strip set with a bunch of leftover fabric.

Must Love Quilts Water/Waves TutorialAfter you’ve sewn your strips together it is time to cut them down to size. If you used a scant 1/4 inch as your seam allowance you’ll end up with your strip set being 9.25″ from top to bottom, and 42-44″ in length. Measure and cut down to 9.25″ squares.

Must Love Quilts Water/Waves TutorialI next laid out my blocks according to the diagram and the repeat pattern. The lap size quilt is made up of 4 sets of the repeating pattern. See below:

Must Love Quilts Water/Waves Tutorial

Now, piece together your columns:

Must Love Quilts Water/Waves Tutorial

After you are done with your columns, sew them together and you should end up with something like this:

Must Love Quilts Water/Waves Tutorial

I went ahead and put together a diagram you can print and color in, since everyone doesn’t have the luxury of Adobe Illustrator. Works the same way, just color, number, and sew! The diagram includes more rows and columns than the tutorial quilt, just in case you want to try more colors.

Must Love Quilts Water/Waves Diagram

If you end up making one, I’d love for you to comment on this post with a link to your blog post about it! Happy sewing everyone! Here is the blue version I have yet to quilt (Blogged here):

Waves

 

Waves in the Wind

49 thoughts on “Water/Waves Tutorial

  1. Wow, that was a lot of work on your part, to make it easy on our part! I would love to do this in blues/greens to really look like waves

    • Haha, I’m happy to make it easier on others! Waves were my initial inspiration and I did mine in blues. Blues and greens would also be gorgeous! If you work it up be sure to let me know. I’d love to see it!

  2. This is beautiful! I am also adding it to my “Must Do” list. I’ve been making quilts for friends and family (usually for new babies) for a few years now and have just started branching out from plain squares two years ago. I think I can do this πŸ™‚

  3. Love your quilt tute. Would especially like to be able to print your quilt and the instructions/pictures of how you did it so I can use it after I gather my fabric.

  4. Thanks for sharing. I love this one! And with the help of your diagram, I just might try it this year πŸ™‚

  5. Karen in Maine

    Great tutorial. I’m going to give it a try. Not sure of colors yet…thank you for doing this.

  6. I failed to realize that the number of strips necessary is for each set only (row 1 & 2, or 3 & 4), so I didn’t buy enough fabric. I bought fat quarters, so I’ll be going back to the store in a while to buy one more of each color. I’m making one that’s only 2 sets, to hang on a wall. I’m really excited about it.

  7. Fabulous tutorial! I’ve pinned it, printed it out, and will start it ASAP! (Housework has been backburnered!) I even have a gradated pack of blues ready to cut immediately! Thanks so much for this tutorial. I look forward to many more! πŸ™‚

  8. I LOVE this modern design!! Your Great chart shows that this is a simple way to get a more complex looking Quilt! Is the unfinished quilt top ~ 60″ X 80″? I am Brand new to quilting; great @ sewing, but fear of messing up w/ my expensive batiks gets in the way of my Starting a quilt. It seems like the key here is to just cut very precisely w/ my rotary cutter. I don’t want to spend $ on pre cut jelly rolls, so I have lots of incredible batik yardage begging for me to just ‘cut loose’! Any comments/ thoughts? Thanks!!

    • Hey Allison! My quilt ended up 53″x70.” The strips aren’t quite jelly roll width, they are 2 1/4 inches so you can get 4 blocks per strip set, so cutting them from yardage is ideal! You can just add more blocks to make whatever size you want. If you are afraid of hurting your batiks try piecing one set from muslin first so you get the feel for the pattern and then go from there. I sometimes do that so I don’t waste fabric experimenting. πŸ™‚

  9. I love it when I learn something new, and Cindy C. shared something new that will be passed on to my friends. THANKS for the PDF tip! LOVELY quilt too!

  10. I have 12 fat quarter batiks in light yellow to dark brown. Hunting for an appropriate pattern I found yours and love it. But will I be able to utilize fat quarters or do I need to put them aside and go buy new batiks? I see you used about 1/2 yard of each of 6 colors. Correct? I’m new to quilting but I’m sure I can handle this.

  11. This pattern would make a quilt as you go so easy, I might have to try this style for my next quilt thank you for the ideal.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s